Melbourne Roof Pros provides professional chimney flashing in Melbourne, FL for residential and commercial properties across the Space Coast. Chimney flashing is a small job with an outsized failure rate, and it is comfortably the most common source of a leak we trace back to somebody else's recent work. It is also nearly always well under the threshold that would drag a recorded notice of commencement into it.
That means it can usually be done quickly, on its own, without a project attached. We mention it because homeowners are often told a chimney leak means a reroof, and while sometimes it genuinely does, far more often it means four pieces of metal that were never fitted correctly in the first place. Getting a second opinion on a chimney leak costs you an afternoon.
The correct detail has two layers and that is the whole secret. Step flashing woven into the courses as they go up the side, and separate counterflashing cut into a reglet in the masonry and folded down over the steps. Two independent pieces of metal, so the roof can move against the chimney without opening a path. Two pieces, two jobs, and the roof is free to move.
What we find instead is a single piece of aluminum bent over the top of the shingles and sealed with mastic against the brick. It works for one dry season. Then the sealant shrinks back, the joint parts, and water finds its way down the brick face and in behind the metal, and the sheathing beside the chimney turns soft while the ceiling shows nothing.
On the upslope side of anything wider than about thirty inches we build a cricket, because a flat back and a chimney is simply a dam with a drain path nobody designed. Water and debris pile against it, the shingles stay wet, and that is the corner that rots first every time on Melbourne roofs. A cricket takes a day to build and it ends the problem for good.
We will not quote you a sealant refresh as a repair. If the flashing is wrong, it is cut in and rebuilt properly, and if that is more than you want to spend today we would rather tell you the real number and let you plan for it than take a couple of hundred dollars for something we know will fail. We would rather lose the job than warrant a bead of sealant.
Our licensed and insured team brings the right materials and equipment to every job — eight-penny ring-shank deck fasteners driven flush to the sheathing, self-adhered underlayment rolled at the laps rather than hand-pressed, Florida Product Approval numbers named on the permit application, aluminum drip edge set beneath the underlayment at the eave, step flashing woven into the courses with counterflashing cut into a reglet, closed-cut valleys over a self-adhered valley liner — and backs the work with a written workmanship warranty. We serve Melbourne and nearby communities including Palm Bay, West Melbourne, Melbourne Village, Palm Shores.
What We Handle
Everything our chimney flashing in Melbourne covers
One crew, one point of contact, and the full range of chimney flashing work in Melbourne, FL. If it is on this list we do it in house rather than handing it to a subcontractor:
- chimney flashing repair melbourne fl
- chimney leak melbourne florida
- chimney flashing replacement brevard county
- step flashing melbourne
- chimney cricket melbourne fl
- counterflashing repair space coast
- chimney roof leak melbourne florida
- chimney reflash brevard
- masonry chimney flashing melbourne fl
- chimney saddle melbourne
- chimney flashing contractor melbourne florida
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Melbourne services.
Materials, equipment and how we do chimney flashing
The difference between chimney flashing that lasts and chimney flashing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with eight-penny ring-shank deck fasteners driven flush to the sheathing, self-adhered underlayment rolled at the laps rather than hand-pressed, Florida Product Approval numbers named on the permit application, aluminum drip edge set beneath the underlayment at the eave, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Melbourne job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in the Space Coast means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do chimney flashing outside Melbourne
Melbourne Roof Pros covers Melbourne and the surrounding communities of the Space Coast. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Chimney Flashing in Palm Bay, FL — Brevard County, population 119,760
- Chimney Flashing in West Melbourne, FL — Brevard County, population 25,924
- Chimney Flashing in Melbourne Village, FL — Brevard County, population 681
- Chimney Flashing in Palm Shores, FL — Brevard County, population 1,200
- Chimney Flashing in Indialantic, FL — Brevard County, population 3,010
- Chimney Flashing in Melbourne Beach, FL — Brevard County, population 3,231
Start on the Melbourne Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Melbourne Chooses Melbourne Roof Pros
- ✓We pull the county and city permit record for your address before we quote, because it decides what can lawfully be repaired and what cannot
- ✓Fascia, soffit and gutter work is quoted separately by default, so bundling does not push your contract past the recording threshold without you choosing it
- ✓The estimate names the assembly by Florida Product Approval number, so what turns up on the pallet can be checked against what the permit was issued for
- ✓Deck nailing is photographed and certified by affidavit where the authority accepts one, which usually removes days from the schedule
The standards behind chimney flashing
Quality here is not a matter of opinion — it is written down. The chimney flashing work we do in Melbourne follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every chimney flashing project in Melbourne gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free chimney flashing free estimate in Melbourne, or request a quote and we'll get right back to you.